Routine equipment maintenance work
01/
Daily Inspection Before Operation
Before starting the machine each day, check all visible components-tracks, hydraulic hoses, bolts, and connectors. Make sure nothing is loose or damaged. A quick walk-around check can prevent most small issues from becoming big problems.
02/
Grease the Lubrication Points Regularly
Your mini excavator has several grease points that need regular lubrication to keep the joints moving smoothly.
Use standard multi-purpose grease.
Wipe away dirt before applying grease..
Grease all pivot points every 8–10 hours of operation or at least once a week for light use.
Regular greasing reduces wear, prevents rust, and extends the service life of the arm, bucket, and swing joints.
03/
Check Hydraulic Oil Leels
Keep the hydraulic oil at the recommended level for smooth, stable operation. Low oil can cause weak digging power or abnormal noise.
Inspect the oil window or dipstick before use.
Replace hydraulic oil and filters according to the maintenance schedule provided in the manual.
04/
Battery Care (Electric Models)
Charge the battery after daily use.
Avoid running the battery completely empty.
Store the machine in a dry, cool place if not used for long periods.
Good battery maintenance will significantly extend lifespan.
05/
Keep the Machine Clean
After each use, remove soil, dust, or debris from the tracks, undercarriage, and bucket.
Clean machinery works better, runs cooler, and lasts longer.
06/
Tighten Bolts & Check Track Tension
Vibration during digging can cause bolts and screws to loosen.
Check and tighten them regularly.
Ensure track tension is correct-not too tight or too loose
07/
Store Indoors When Possible
If you won’t use the machine for a while, park it indoors or cover it to prevent rust and weather damage.
08/
Follow the Scheduled Service Plan
For long-term reliability, follow the recommended service intervals:
Lubrication: Daily/weekly
Hydraulic oil replacement: Every 500 hours or as directed
Full inspection: Every 6–12 months
Lubricating oil is added before leaving the factory.
Lubricating oil is added before leaving the factory.
FAQ
Q:What kind of grease should I use?
A: Standard multi-purpose lithium-based grease works perfectly for daily maintenance.
Q: Do I need to check the hydraulic hoses regularly?
A:Yes-just give them a quick look before each use. Make sure there are no cracks, leaks, or loose fittings.
Q: How should I charge the battery?
A: Use the original charger, keep the charging area dry, and avoid letting the battery run completely empty too often. A full charge after each workday is ideal.
Q: What should I do after using the machine?
A: Wipe off dust and mud, grease the moving joints if needed, and store the machine in a dry, shaded place.
Q:How do I keep the excavator in good condition long-term?
A: Regular greasing, timely charging, basic cleaning, and checking bolts/hoses every week will keep it running smoothly.
Q: Is there anything I should do before the first use?
A: Yes-make sure all bolts are tight, controls respond correctly, and the battery is fully charged before starting your first job.
Q: What if I notice something unusual during operation?
A:Stop the machine immediately, check for loose parts or leaks, and contact our support team if you’re unsure. Catching small issues early prevents big problems later.
